[CHANGE THIS]
    Next Ad
102_2483.JPG

102_2483.JPG
supersize

102_2484.JPG
supersize

102_2485.JPG
supersize

102_2486.JPG
supersize

102_2487.JPG
supersize

gfh.JPG
supersize

102_2488.JPG
supersize

102_2489.JPG
supersize

102_2491.JPG
supersize


Posts: 16
Registered: February 2011
      Feedback: None

1980 Camaro
Quantity Views Date Posted
1 1337 Sun January 22, 2012
spacer
Asking Price Shipping Amount Condition
$2,000.00 None Fair

Description:

1980 Camaro/ 1978-1979 Z28 Clone



78-79 Z28 hood, new good mark Z28 fenders. I have a clear title for the Camaro.  It is currently in primer, but will need some body work finished, nothing major though.  The sub frame both front and rear are solid only surface rust.  The motor is a 383 stroker with the following components:


 


Lunati sledgehammer


Boared.30 over


Crank is internally balanced


Scat 5.7 I-beam rods with .927 wrist pin


1970 350 76 CC heads


2.45 4 bolt main


Flat top pistons


400 small block flywheel


It was dynoed back in 2008 at 320 hp and 420 ft-lbs of torque


 


The started may need to be replaced from sitting so long.  Alternator and water pump were replaced about a year ago.  It has a factory 350 turbo Trans.  Most of interior is there as far as trim pieces and seats, the seats are out of a 1987 Iroc Camaro but I do have factory buckets if wanted but they need recovered, will need a headliner and carpet kit.  The door panels are there and can either be saved or replaced that would be up to you.   The gauge cluster is a 150 speedometer out of a 1970 Z28 and a fuel gauge, but it does have aftermarket water and oil gauges from summit racing and a sunpro tach. The front driver and passenger side floors will need to be patched, I have some sheet metal that can be used or you can buy the patch panels from yearone or classic. The driver side rear axel is bent at the hub so it will need towed out, but it can still be driven so the internals are still ok.  It has a crack in windshield but it does not leak.  The only leak is from door weather stripping at the top of the driver’s door.  Pretty much what you see in the pictures is what you get.  If you have any questions about anything else just as me.

Keywords: 1980 clone z28 383

102_2483.JPG
more

Author
das_zero

Registered: February 2011
Posts: 16
Comment Date: Sun January 22, 2012

Forgot to mention location: Mount Savage MD

Roar
* $1 - $50 *

Registered: May 2009
Posts: 12
Comment Date: Sun July 15, 2012

How abt more info: A/c? disk or drum rear, which ARB's, SMOG legal, Cat's duals? headers? rims, tires, why not just put the whole code sheet on 


Seems even while cheeep, there's little interest


cheers


ROAR